Do you know how to protect your touch screen after using it for so long?In order to better help you understand and protect the touch screen, the following for you to share some mobile phone touch screen small knowledge, the following content from the network users to share, interested friends may wish to learn.
Mobile phone touch screen knowledge: teach you how to protect the touch screen
1. If the display resolution or display mode of the touch screen is changed or the refresh frequency of the touch screen controller is adjusted during the operation of the capacitive touch screen, the touch screen system must be calibrated when the cursor and the touch point are not corresponding.
2. In order to ensure the normal operation of the touch screen system, in addition to ensuring the correct installation of the system software, it is also important to remember that two or more touch screen drivers should not be installed on a host computer, which may easily lead to conflicts in the operation of the system and make the touch screen system unable to work normally.
3. Do not let the surface of the touch screen have water droplets or other soft things stuck to the surface, otherwise the touch screen is easy to think that the hand touch will lead to inaccurate surface acoustic screen.In addition, when cleaning the dirt on the touch screen surface, you can carefully wipe it from the screen with a soft dry cloth or cleaner, or use a piece of dry soft cloth dipped in industrial alcohol or glass cleaning liquid to clean the touch screen surface.
4, if use your hands to touch or other touching surface acoustic wave touch screen, touch screen is very slow, it shows that is likely to be already old touch screen system, the internal clock frequency is too low, or because the touch screen surface water in the mobile, restore fast response to touch screen, must start to replace or upgrade system, or use dishcloth dry the water on the surface of the touch screen.
5, if the user is operating the touch screen, the direction of the touch is to the left, but the system cursor is moving to the right, this failure may be because the control box and the touch screen connected to the joint or the touch screen left and right position installed in reverse, the user only need to change the direction of the beginning.