If the front cover of the monitor is placed on the worktable and the kinescope is installed in the front cover of the monitor, the lower part of the front cover of the monitor must be elevated so that the touch screen does not directly contact the worktable because the surface of the touch screen is arc-shaped, otherwise it is very easy. Crush the touch screen during installation!
The height of the rubber gasket should slightly exceed the total height of the touch screen and double-sided tape.
When installing the kinescope into the front cover of the monitor, pay attention to the position of the mounting hole on the right kinescope and the mounting hole on the front cover of the touch screen. Otherwise, the image of the touch screen will be tilted and the installation work will be resumed.