What should we pay attention to when using industrial touch screens?

- Jul 09, 2018-

Now the development of science and technology more and more good, we can use at ordinary times to a variety of electronic products, industrial touch screen as one of the products of electronics, now on the market demand for industrial touch screen is also increasing, but we need when using it matters still more, exactly what are the considerations?The following editor will introduce you

1. The touch screen part of the industrial touch screen is made of glass with sharp edges and gloves/finger sleeve are required for assembly.

2. The touch screen part of the industrial touch screen is glass fragile goods. Do not exert strong impact on the touch screen when assembling.

3. The film surface of industrial touch screen is the touch surface, which means the front of the product;The glass surface is a non-touch surface, i.e. the back of the product.

4. Avoid taking the lead wire directly and picking up the touch screen, and avoid pulling the lead wire.

5. No bending action can be performed on the drawing line reinforcement plate.

6. No folding is allowed at any part of the lead line.When the lead wire is assembled, it must be inserted horizontally.

7. It is necessary to operate on a single piece of the product when taking and releasing the product. It is easy to handle and handle the product lightly, so as to avoid product collision and scratch the surface of the product.

8. When cleaning the surface of industrial touch screen, please dip the soft cloth (deer skin) into petroleum ether and wipe it.

Of course, although the industrial touch screen is a little high in cost, it still has a great advantage in accuracy and control convenience.Plus for that

With the control of the central part concerned, the industrial touch screen can better improve the experience effect, especially the control of which is more in line with the current characteristics.

First of all, attention should be paid to the correlation degree of industrial touch device control. Through irregular maintenance and equipment testing, more rich control channels can be ensured.